58 Removing and Installing Parts
11
Replace the computer cover (see page78).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
12
Connect your computer and devices to electrical outlets, and then turn them on.
13
Click the
Start
button, right-click
My Computer
, and then click
Properties
.
14
Click the
General
tab.
15
To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Cards CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer’s electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.
Your Dellâ„¢ computer provides three slots for PCI cards.
PCI Cards
If you are installing or replacing a card, follow the procedures in the next section. If you are removing but not
replacing a card, see "Removing a PCI Card" on page60.
If you are replacing a card, remove the current driver for the card from the operating system.
Installing a PCI Card
1
Follow the procedures in "Before You Begin" on page47.
2
Unscrew and remove the filler bracket for the card slot you want to use.