4.Reboot all servers.
5.Install the Data Managed Node for NetWare on one of the NetWare servers. For instructions, see Chapter 12, “Novell NetWare Support for Dell PowerVault 6xxF Storage Systems.”
6.Install the QLogic Fibre Channel Configuration Utility on the Windows NT man- agement station. For instructions, see Chapter 4, “Installing the Host Bus Adapter in the Server.”
7.Install the Dell OpenManage Data Supervisor or the Dell OpenManage Data Administrator on the Windows NT management station. For instructions, see Chapter 10 “Installing and Configuring Windows NT SAN Software Components.“
8.Bind LUNs. For instructions, see the Dell OpenManage Data Supervisor, Event Monitor, and Integrator Installation and Operation guide or the Dell OpenManage Data Administrator Installation and Operation Guide.
9.Reboot all servers.
10.Use Mount commands to allocate LUNs to the NetWare servers. For instruc- tions, see Chapter 12, “Novell NetWare Support for Dell PowerVault 6xxF Storage Systems.”
11.Install system management software. For instructions, see Chapter 11, “Manag- ing the SAN.”
12.Install the selected SAN tape backup software. For instructions, see the software documentation.
'/0
Figure