c.For the Windows NT servers, do the following:
1.Cable the Windows NT servers to the switches.
2.Cable the 650F/651Fs associated with the Windows NT servers to the switches.
3.Create a zone for the Windows NT servers and its storage and save the zone, add the zone to the configuration, save the configuration file, enable the configuration, and save the configuration file again.
4.Reboot the Windows NT servers.
d.For the NetWare servers, do the following:
1.Cable the NetWare servers to the switches
2.Cable the 650F/651Fs associated with the NetWare servers to the switches.
3.Create a zone for the NetWare servers and its storage and save the zone, add the zone to the configuration, save the configuration file, enable the configuration, and save the configuration file again. For instructions, see the zoning documentation that came with your system.
4.Reboot the NetWare servers.
4.Install the Data Managed Node on at least one server in each zone. For instruc- tions, see Chapter 10, “Installing and Configuring Windows NT SAN Software Components.”
5.Install the QLogic Fibre Channel Configuration Utility on the Windows NT man- agement station. For instructions, see Chapter 4, “Installing the Host Bus Adapter in the Server.”
6.Install the Dell OpenManage Data Supervisor or the Dell OpenManage Data Administrator on the Windows NT management station. For instructions, see Chapter 10, “Installing and Configuring Windows NT SAN Software Components.“
7.Bind LUNs. For instructions, see the Dell OpenManage Data Supervisor, Event Monitor, and Integrator Installation and Operation guide or the Dell OpenManage Data Administrator Installation and Operation Guide.
8.Reboot servers all servers after all LUNs have transitioned to the owned state. You can verify the state by using the Dell OpenManage Data Supervisor or the Dell OpenManage Data Administrator.
9.Configure Dell OpenManage Storage Consolidation on the Windows NT Storage Consolidation servers.
10.Use Mount commands to allocate LUNs to NetWare servers. For instructions, see Chapter 12, “Novell NetWare Support for Dell PowerVault 6xxF Storage Systems.”
support.dell.com | SAN Configurations |
