|
| |
One Windows NT system is required | The Windows NT system must be in a | |
for managing storage | LAN with a NetWare Server, and at least | |
| one of the SAN attached NetWare Servers | |
| must run Data Managed Node for | |
| NetWare. | |
|
| |
Each PowerVault 650F/651F requires |
| |
one of the following: |
| |
A SAN attached Windows NT | This system is attached to the SAN via | |
management station within its | Fibre Channel. | |
zone |
| |
A server running Data Managed | Windows NT zones: Windows NT man- | |
Node within its zone and LAN | agement station must be | |
attached Windows NT manage- | to a | |
ment station | running Data Managed Node for | |
Windows NT. | ||
| ||
| NetWare zones: Windows NT manage- | |
| ment station must be | |
| ||
| Data Managed Node for NetWare. | |
| Note: The Windows NT management sta- | |
| tion may be used to manage storage in | |
| both Windows NT zones and NetWare | |
| zones concurrently. | |
|
| |
Maximum of four storage nodes | A maximum of four of the following | |
| nodes: PowerVault 35F bridge, PowerVault | |
| 650F, and PowerVault 651F. Because Net- | |
| Ware SANs are nonredundant, a Power- | |
| Vault 650F and PowerVault 651F with two | |
| storage processors count as two nodes | |
| (for NetWare only). | |
|
| |
Maximum of four PowerVault 120Ts | Allows a maximum of 16 PowerVault | |
per PowerVault 35F | 120Ts per SAN. | |
|
| |
Maximum of two PowerVault 130Ts | Allows a maximum of eight PowerVault | |
per PowerVault 35F | 130Ts per SAN. | |
|
| |
Maximum of four PowerVault Fibre | Two switches per fabric allowing four | |
Channel switches per SAN | switches for redundant configurations and | |
| two for nonredundant configurations. At | |
| least one PowerVault 51F per fabric is | |
| strongly recommended for its support of a | |
| zoning graphical user interface (GUI) (firm- | |
| ware version 2.1.x ), see the Dell | |
| PowerVault Systems Storage Area Net- | |
| work Revision Compatibility Guide. | |
|
|
Page 4
Image 4
