|
|
Maximum of four storage nodes | A maximum of four of the following |
| nodes: PowerVault 35F, PowerVault 650F, |
| and PowerVault 651F. Because NetWare |
| SANs are nonredundant, a PowerVault |
| 650F and PowerVault 651F with two stor- |
| age processors count as two nodes (for |
| NetWare only). |
|
|
Maximum of four PowerVault 120Ts | Allows a maximum of 16 PowerVault |
per PowerVault 35F | 120Ts per SAN. |
|
|
Maximum of two PowerVault 130Ts | Allows a maximum of eight PowerVault |
per PowerVault 35F | 130Ts per SAN with a maximum of four |
| drives per bridge type. |
|
|
Maximum of two PowerVault Fibre | Both the PowerVault 50F and the Power- |
Channel switches per SAN | Vault 51F switches are supported. |
|
|
Heterogeneous SANs are SANs with multiple operating system environments. Each operating system environment must be a separate zone.
Table
NOTE: Windows NT, MSCS, and NetWare servers must all be in separate fabric zones and cannot share the same storage.
|
|
Maximum of 10 servers; a maximum | Each MSCS pair with its PowerVault 650F/ |
of 12 servers are supported if it is a | 651F must be in its own zone. All Win- |
backup only SAN. | dows NT servers running storage consoli- |
| dation must be in their own zone along |
| with their storage nodes. All NetWare |
| servers must be in their own zone along |
| with their associated storage nodes. Net- |
| Ware 4.2 and 5.x may exist in the same |
| zone. See the release notes located on |
| the Dell PowerVault Fibre Channel Utilities |
| Version 2.0 CD or the Dell PowerVault |
| Fibre Channel Update Version 2.0 CD for |
| the latest list of servers and revision levels |
| required. |
|
|
support.dell.com | SAN Configurations |
