Removing the I/O Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the battery. See "Removing the Battery" on page 12.
2Remove the base cover. See "Removing the Base Cover" on page 20.
3Remove the keyboard. See "Removing the Keyboard" on page 17.
4Remove the
Procedure
1Remove the screw that secures the I/O board to the computer base.
2Lift the connector latch and, using the
3Peel the I/O board cable from the computer base.
4Lift the I/O board along with its cable off the computer base.
1 2 3
4
5
1 | connector latch | 2 |
|
|
|
|
|
3 | I/O board cable | 4 | screw |
|
|
|
|
5 | I/O board |
|
|
|
|
|
|
Removing the I/O Board | 37 |
