Dell 1950 Selecting Diagnostics Options, Viewing Information and Results

Running the System Diagnostics 113
Selecting Diagnostics Options
Use the Diagnostics Options area to select how you want to test a device. You can set the following options:
•
Non-Interactive Tests Only — When checked, runs only tests that require no user intervention.
•
Quick Tests Only — When checked, runs only the quick tests on the device. Extended tests will not run
when you select this option.
•
Show Ending Timestamp — When checked, time stamps the test log.
•
Test Iterations — Selects the number of times the test is run.
•
Log output file pathname — When checked, enables you to spec ify where the test log file is saved.
Viewing Information and Results
The tabs in the Customize window provide informa tion ab out the test and the test results. The following tabs
are available:
•
Results — Displays the test that ran and the result.
•
Errors — Displays any errors that occurred during the test.
•
Help — Displays information about the currently selected device, component, or test.
•
Configuration — Displays basic configu ration information about the currently selected device.
•
Parameters — If applicable, displays paramete rs that you can set for the test.