Understanding the Tool Box Menus 461
Tone/Pulse Tone* Sets the dialing type to Tone.
Pulse (10PPS) Sets the dialing type to Pulse(10PPS).
Pulse (20PPS) Sets the dialing type to Pulse(20PPS).
Resend Delay 3–255 Sets the interval between transmission attempts within
the range of 3 to 255 seconds.
8*
Redial
Attempts
0-13 Sets the number of redial attempts to make when the
destination fax number is busy, within the range of 0 to
13.
3*
Redial Delay 1–15 Sets the interval between redial attempts within the
range of 1 to 15 minutes.
1*
Junk Fax
Setup
On Rejects faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered in
the Phone Book.
Off* Does not reject faxes sent from unwanted numbers.
Remote
Receive
On Receives a fax by pressing a remote receive code on the
external telephone after picking up the handset of the
telephone.
Off* Does not receive a fax by pressing a remote receive
code on the external telephone after picking up the
handset of the telephone.
Remote Rcv
Tone
00–99 Sets the tone to start Remote Receive.
00*
Fax Header On* Prints the information of the sender on the header of
faxes.
Off Does not print the information of the sender on the
header of faxes.
Fax Header Name Sets the sender's name to be printed on the header on
faxes.
Fax Number Sets the fax number of the printer, which will be
printed on the header of faxes.
Fax Cover
Page
On Attaches a cover page to faxes.
Off* Does not attach a cover page to faxes.
DRPD
Pattern
Pattern 1–7 Provides a separate number for faxing with a
distinctive ring pattern.
Pattern 4*