Dell 2400MP manual Problem

Problem (continued)	Possible Solution (continued)
Partial, scrolling, or	1	Press the Resync button on the remote
incorrectly displayed image		control or the control panel.
	2	If you are using a Dell portable computer, set
		the resolution of the computer to XGA
		(1024 x 768):
		a Right-lick the unused portion of your
		Windows desktop, click Properties and
		then select Settings tab.
		b Verify the setting is 1024 x 768 pixels for
		the external monitor port.
		c Press	(Fn+F8).
	If you experience difficulty in changing
	resolutions or your monitor freezes, restart all
	the equipment and the projector.
	If you are not using a Dell portable computer,
	see your documentation.
The screen does not display	If you are using a portable computer, press
your presentation		(Fn+F8).
Image is unstable or flickering	Adjust the tracking in the OSD Display tab
	(in PC Mode only).
Image has vertical flickering	Adjust the frequency in the OSD Display tab
bar	(in PC Mode only).
Image color is not correct	• If your graphic card output signal is sync on
		Green, and you would like to display VGA at
		60Hz signal, please go into OSD select
		Display, select Signal Type and then select
		RGB.
	• Use Test Pattern in the Preferences menu.
		Ensure that the colors of the test pattern are
		correct.
Image is out of focus	1 Adjust the focus ring on the projector lens.
	2 Ensure that the projection screen is within
		the required distance from the projector
		(3.9 ft [1.2 m] to 39.4 ft [12 m]).

32

Troubleshooting Your Projector