Back
Mode
When PIP/PBP activated
PIP/PBP Source
PIP Position
PIP Size
PIP/PBP Contrast
PIP/PBP Hue/Tint
PIP/PBP Saturation
Exit Menu
or
PIP/PBP submenu when PIP/PBP ON (main source is | PIP/PBP submenu when PIP |
or
NOTE: When using D
Push 
to go back to the main menu.
There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Use | and | to browse and | to select "Off", "PIP" or "PBP". |
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP wind
Select an input signal for PIP/PBP.
Use 
and 
to browse and 
to select.
Select PIP window position.
Use 
and 
to browse and 
to select.
Select PIP window size.
Use 
and 
to browse and 
to select.
Adjust the contrast level of the picture in PIP/PBP Mode. 
reduce the contrast
increases the contrast
This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color. 
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP/PBP image.
makes the image look more monochrome
makes the image look more colorful
Push 
to exit the OSD main menu.
OSD Warning Messages
Your monitor will prompt you to achieve the best performance when you select PBP. You may see the following messages under certain combinations of input sources in PBP mode.
