Dell 2407WFP-HC, 2407WFP-H C appendix Electrical, Physical Characteristics

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024

VESA, 1600 x 1200

VESA, 1920 x 1200

48.4

60.0

67.5

64.0

80.0

75.0

74.0

60.0

75.0

75.0

60.0

75.0

60.0

60.0

65.0

78.8

108.0

108.0

135.0

162.0

154.0

-/-

+/+

+/+

+/+

+/+

+/+

+/-

Electrical

The following table lists the electrical specification:

Video input signals	Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
	Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input
	impedance
	S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input
	impedance
	Composite, 1 volt(p-p), 75 ohm input impedance
	Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input
	impedance
Synchronization input signals	separate horizontal and vertical,
	3.3V CMOS or 5V TTL level, positive or negative sync.
	SOG (Sync on green)
AC input voltage / frequency / current	100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
Inrush current	120V: 40A (Max.)
	240V: 80A (Max.)
Physical Characteristics
The following table lists the physical characteristics:
Signal cable type	D-sub: Detachable, Analog, 15pin, shipped attached to the
	monitor
	DVI-D: Detachable, Digital, 24pin, shipped detached from the
	monitor
	S-video: Not included with display
	Composite: Not included with display
	Component: Not included with display
Dimensions (with stand):
Height (fully extended in portrait mode)	584.7 mm (23.0 inches)
Height (compressed/locked in landscape	387.9 mm (15.3 inches)
mode)
Width	559.7 mm (22.0 inches)
Depth	195.0 mm ( 7.7 inches)
Weight
Monitor (Stand and Head)	8.3 Kg (18.3 lb)