Back to Contents Page
Finding Software Solutions Dell™PowerEdge™2500SystemsInstallationandTroubleshootingGuide
Installing and Configuring Software
Using Software
Because most systems have several application programs installed in addition to the operating system, isolating a software problem can be confusing. Software errors
can also appear to be hardware malfunctions at first.
Software problems can result from the following circumstances:
lImproper installation or configuration of a program
lInput errors
lDevice drivers that may conflict with certain application programs
lInterrupt conflicts between devices
You can confirm that a system problem is caused by software by running the Dell Diagnostics. If all tests in the test group are completed successfully, the problem is
most likely caused by software.
This section provides some general guidelines for analyzing software problems. For detailed troubleshooting information on a particular program, see the documentation
that accompanied the software or consult the support service for the software.
Installing and Configuring Software
Use virus-scanning software to check newly acquired programs and files for viruses before installing the programs on the system's hard-disk drive. Viruses can quickly
use all available system memory, damage and/or destroy data stored on the hard-disk drive, and permanently affect the performance of the programs they infect.
Several commercial virus-scanning programs are available for purchase.
Before installing a program, read its documentation to learn how the program works, what hardware it requires, and what its defaults are. A program usually includes
installation instructions in its accompanying documentation and a software installation routine.
The software installation routine assists users in transferring the appropriate program files to the system's hard-disk drive. Installation instructions may provide details
about how to configure the operating system to successfully run the program. Always read the installation instructions before running a program's installation routine.
When you run the installation routine, be prepared to respond to prompts for information about how the system's operating system is configured, what type of system
you have, and what peripherals are connected to the system.
Using Software
The following subsections discuss errors that can occur as a result of software operation or configuration.
Error Messages
Error messages can be produced by an application program, the operating system, or the system. Messages and Codes discusses the error messages that are
generated by the system. If you receive an error message that is not listed in "Indicators, Messages, and Codes," check the operating system or application program
documentation.
Input Errors
If a specific key or set of keys is pressed at the wrong time, a program may give you unexpected results. See the documentation that came with the application program
to make sure that the values or characters you are entering are valid.
Make sure that the operating environment is set up to accommodate the programs you use. Keep in mind that whenever you change the parameters of the system's
operating environment, you may affect the successful operation of the programs. Sometimes, after modifying the operating environment, you may need to reinstall a
program that no longer runs properly.
Program Conflicts
Some programs may leave portions of their setup information behind, even though you have exited from them. As a result, other programs cannot run. Rebooting the
system can confirm whether these programs are the cause of the problem.
Device drivers, which are programs that use specialized subroutines, can cause problems with the system. For example, a variation in the way the data is sent to the