2Setting Up the Monitor
Preparing the Stand
NOTE: The stand is attached when the monitor is shipped from the factory.
a.Place the monitor on a soft cloth or cushion.
b.Pull the monitor stand arm upwards clear of the monitor.
c.Place the monitor upright.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
NOTE: The VGA/DVI cable can be purchased separately.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1.Turn off your computer and disconnect the power cable.
Connect the HDMI/DVI/VGA cable from your monitor to the computer.
Setting Up the Monitor | 21 |
