IN S TA L L AT I O N

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

1

To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the L-AUDIO-R jacks on the TV.

3

Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO jack on the TV.

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

* Each external input source device has a different back panel configuration.

Connecting a DVI-D Cable

1

Connect a DVI-D cable between the DVI-D connector on the TV

and the DVI connector on the DVD player/ Set-Top BOX.

2

Connect a set of audio cables between the L-AUDIO-R jack on the TV and the

AUDIO OUTPUT jacks on the DVD player/ Set-Top BOX.

* Each external input source device has a different back panel configuration.

English-12

Page 17
Image 17
Samsung LT-P266W manual Connecting an S-VHS VCR, Connecting a DVI-D Cable