Samsung LT-P266W 1 2, 3 4, 5

English-17

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different modes:

TV, VCR, Cable, DVD or Samsung Set-top box. Pressing the corresponding button on the

remote control allows you to switch between these modes, and control whichever piece of

equipment you choose.

Note

The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.

This remote control is only compatible with Samsung Set-top boxes.

Note on Using Remote Control Modes: VCR

When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.

1Turn off your VCR.

2Press the MODE button and make sure that the VCR LED

is illuminated.

3Press the SET button on your TV’s remote control.

4Using the number buttons on your remote control, enter

three digits of the VCR code listed on page 20 of this

manual for your brand of VCR. Make sure you enter three

digits of the code, even if the first digit is a “0”.

(If more than one code is listed, try the first one.)

5Press the Power button on the remote control. Your VCR

should turn on if your remote is set up correctly.

If your VCR does not turn on after set-up, repeat steps

2, 3 and 4, but try one of the other codes listed for your

brand of VCR. If no other codes are listed, try each VCR

code, 000 through 086.

Setting Up the Remote to Operate Your VCR

OPERATION

BN68-00656A-04Eng.qxd 9/18/04 10:39 AM Page 17

Contents

Main BN68-00656B-03 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. Integrated When you connect a computer or a game console to the TV and select the 4:3 screen mode. C Chapter 1: Your New TV Chapter 2: Installation Chapter 3: Operation Chapter 4: Special Features C Chapter 5: PC Display Chapter 6: Troubleshooting Appendix List of Parts List of Features Chapter One Familiarizing Yourself with Your New TV Page Remote Control Page Installing Batteries in the Remote Control If remote control doesnt work Connecting VHF and UHF Antennas Chapter Two Connecting Cable TV To connect to a cable TV system, follow the instructions below. Page Page Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Acoaxial cable is usually included with a VCR. (If not, check your local electronics store). Connecting a VCR Connecting an S-VHS VCR Connecting a DVI-D Cable Note: For an explanation of Component video, see your DVD player owner's manual. Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Note: For an explanation of Component video, see your Set-Top Box owner's manual. Connecting a Digital TV Set-Top Box The connections for a typical set-top box are shown below. Connecting a PC Chapter Three Changing Channels At any time, you can temporarily cut off the sound using the Mute button. Adjusting the Volume Turning the TV On and Off Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Viewing the Menus Setting Up Your Remote Control Note 1 2 3 4 5 Page Page English-20 Remote Control Codes BN68-00656A-04Eng.qxd 9/18/04 10:39 AM Page 20 VCR Codes DVD Cable Box Plug & Play Feature to confirm your choice. Memorizing the Channels Page Labeling Channels Alternate method: Adding and Erasing Channels (Manual Method) To Set-up Favorite Channels To Select Source To Edit the Input Source Name Name the input device connected to the input jacks to make your input source selection easier. Using Automatic Picture Settings Customizing the Picture Using Automatic Sound Settings Customizing the Sound Selecting a Menu Language Chapter Four Setting the Blue Screen Mode Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. English-34English-34 Viewing Picture-in-Picture BN68-00656A-04Eng.qxd 9/18/04 10:45 AM Page 34 AV Activating Picture-in-Picture Press the MENU button to display the menu. Page DNIe (Digital Natural Image engine) My Color Control Page Dynamic Contrast Brightness Sensor Freezing the Picture Changing the Screen Size Adjusting the Color Tone You can change the color of the entire screen according to your preference. Automatic volume control Reduces the differences in volume level among broadcasters. To select the WOW option Emphasizes midrange and bass and provides a simulated surround-sound experience. TRADEMARK & LABEL LICENSE NOTICE is a trademark of SRS Labs,Inc. WOW technology is incorporated under license from SRS labs,Inc. Special Sound Options Note :Headphones must be purchased separately. Adjusting the Headphone Sound Selecting the Main or Sub Sound You can select to hear sound from either the Main or Sub picture when PIP is On. Sub Woofer Note :You can also set the time using the numeric buttons on the remote. Setting the Clock Setting the On/Off Timer Page Setting the Sleep Timer Set the timer for the TV to turn off at the preset time automatically. Viewing Closed Captions Page Using the V-Chip (Option) How to Enable/Disable the V-Chip Note : PIP operation is disabled when the V-chip is on. Page Page How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X Page Color Weakness This function doesnt work when the Source is in PC mode, or DNIe is in off mode. Selecting the Melody You can hear a melody sound when the television is powered on or off. Chapter Five Using Your TV as a Computer (PC) Display How to Auto Adjustment Page Changing the Screen Position To Initialize the Screen Position or Color Settings Identifying Problems Chapter Six T Installing the Stand <1> <2> Maintenance of Your LCD TV Installing the Wall Mount Kit Cleaning and Maintaining Your TV Using Your TV in Another Country Specifications Model Name Display Modes