PC DI S P L AY

Adjusting the Screen Quality

The purpose of the picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

Press the PC button on the remote control to select the PC mode.

1

Press the MENU button to display the menu.

Press the UP/DOWN buttons to select “Setup”, then press the ENTER button.

Press the UP/DOWN buttons to select

“PC” then press the ENTER button.

2

Press the ENTER button to select “Image Lock”.

3

Press the UP/DOWN buttons to select “Coarse” or “Fine”,

then press the ENTER button.

Press the

LEFT/RIGHT

buttons to adjust the screen quality, vertical stripes may appear or the picture may be blurry.

Press the EXIT button to exit.

<Adjusting Coarse>

<Adjusting Fine>

English-65

Page 70
Image 70
Samsung LT-P266W manual Adjusting the Screen Quality, Left/Right