Back to Contents Page
Rear I/O Assembly
Dell™ Vostro™ 320 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Back I/O Assembly
NOTE: You may need to install Adobe® Flash® Player from Adobe.com to view the following illustrations.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the front panel.
3.Remove the internal panel.
4.Remove the I/O cover.
5.Remove the hinged stand.
6.Remove the optical drive.
7.Remove the back cover.
8.Remove the screws that secure the back I/O assembly to the computer.
9.Carefully rotate the assembly away from the computer.
10.Disconnect the USB cable, I/O cable, and
11.Lift the back I/O assembly away from the computer.
Replacing the Back I/O Assembly
To replace the back I/O assembly, perform the above steps in reverse order.
