Basic Installation Schematic of Dell UPS, hardwired to overcurrent protection device
Suitable for all models (including 5600W Online and 10kW)
Electrical input location of Dell UPS
If hardwiring input to UPS, input terminal block locations vary by model. Input connection exits bottom for 3750W, 4200W, 5600W (both models). Input connection exits top for 10kW. Diagrams show back (rear) of each UPS model. Microsoft® Visio stencils for Dell UPS are available at http://dellups.com/support_download.asp > Support FAQ.
Dell UPS Site Preparation Guide, EMEA (230V) | Revision 2, December 2012 |
