Adding and Replacing Parts 101
NOTE: Memory modules purchased from Dell are covered under your computer warranty.
3If you are replacing a memory module, remove the existing module:
aUse your fingertips to carefully spread apart the securing clips on each end of the
memory module connector until the module pops up.
bRemove the module from the connector.
4Ground yourself and install the new memory module.
NOTE: If the memory module is not installed properly, the computer may not boot properly. No
error message indicates this failure.
aAlign the notch in the module edge connector with the tab in the connector slot.
bSlide the module firmly into the slot at a 45-degree angle, and rotate the module
down until it click s into place. If yo u do not feel the cl ick, remove the mo dule and
reinstall it.
securing clips
memory module