Dell 600m manual Display Latch, Remove the display assembly Remove the display bezel

Display Latch

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

1.Remove the keyboard.

2.Remove the display assembly.

3.Remove the display bezel.

4.Remove the three M2.5 x 4-mm screws that secure the display latch bracket to the top cover.

5.Lift the display bracket out of the top cover, and then remove the display latch.

NOTE: Ensure that the display bracket is upright when you replace the display latch.

1top cover

2M2 x 5-mm screws (3)

3display bracket

4display latch

Back to Contents Page