Back to Contents | Dell 600m guide

5.Open the display approximately 1/2 inch.

NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the connector.

6.Press the hard drive cover down until it is fully seated in the bay, and tighten the screw.

7.Use the Operating System CD to install the operating system for your computer.

8.Use the Drivers and Utilities CD to install the drivers and utilities for your computer.

Back to Contents Page

Page 19

Image 19

Contents

July 2003 Rev. A01 Preparing to Work Inside the Computer Before You Begin Computer Orientation Recommended ToolsScrew Identification Page Back to Contents Flashing the Bios Remove the display assembly Bluetooth Card Removing the Color Insert Cover Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly Display Assembly and Display LatchPage Display Panel Display Bezel Display Latch Remove the display assembly Remove the display bezel Docking Doors Installing the Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Back to Contents Keyboard Back to Contents Base Latch Modem Modem Modem cable Palm Rest Back to Contents Parallel Connector Pin Assignments for I/O ConnectorsUSB Connector Video Connector 18-25 Reserve Battery Speakers Removing the System Board System Board Installing the System Board System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly March 2003 Rev. A00 Memory Module Memory Module, Mini PCI Card, and Modules Mini PCI Card Page If the Device Security Screw Is Installed If the Device Security Screw Is Not InstalledModules Back to Contents

Dell 600m manual Back to Contents

Models: 600m

Back to Contents Page