Dell 600m manual Back to Contents

1 center control cover

4.Remove the keyboard:

a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.

NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the keyboard.

b.Rotate the keyboard up and slide it forward.

c.Hold the keyboard up and slightly forward to allow access to the keyboard connector.

d.Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.

NOTE: When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palmrest.

1M2.5 x 6-mm screws (2)

2keyboard tabs

3palm rest

Back to Contents Page