Recommended Tools, Computer Orientation | Dell 600m specs

Recommended Tools

The procedures in this manual require the following tools:

•#1 Phillips screwdriver

•¼-inch flat-blade screwdriver

•Small plastic scribe

•Flash BIOS update program floppy disk or CD

Computer Orientation

1

2

3

4

back

right

front

left

Screw Identification

When you are removing and replacing components, photocopy "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their sizes.

Optional Module:

(1 each)

Hard Drive:

(1 each)

Keyboard:

(2 each)

Image 3

Dell 600m manual Recommended Tools, Computer Orientation, Screw Identification

Contents

July 2003 Rev. A01 Preparing to Work Inside the Computer Before You Begin Recommended Tools Computer OrientationScrew Identification Page Back to Contents Flashing the Bios Remove the display assembly Bluetooth Card Color Insert Cover Removing the Color Insert CoverReplacing the Color Insert Cover Installing the Microprocessor Module Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly Display Assembly and Display LatchPage Display Panel Display Bezel Display Latch Remove the display assembly Remove the display bezel Installing the Docking Doors Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Back to Contents Keyboard Back to Contents Base Latch Modem Modem Modem cable Palm Rest Back to Contents Parallel Connector Pin Assignments for I/O ConnectorsUSB Connector Video Connector 18-25 Reserve Battery Speakers Removing the System Board System Board Installing the System Board System Components Microprocessor Thermal-Cooling Assembly Removing the Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly March 2003 Rev. A00 Memory Module Memory Module, Mini PCI Card, and Modules Mini PCI Card Page If the Device Security Screw Is Not Installed If the Device Security Screw Is InstalledModules Back to Contents