Dell D11M002, 660 owner manual Procedure

Procedure

1If you are removing the primary optical-drive, disconnect the power and data cables from the primary optical-drive.

2If you are removing the secondary optical-drive:

a Disconnect the power cable from the primary and secondary optical-drives.

b Disconnect the data cable from the secondary optical-drive.

NOTE: If you are not replacing the optical drive at this time, disconnect the other end of the data cable from the system board connector and set it aside. You can use the data cable to install an optical drive at a later time.

3Remove the screws that secure the optical drive to the chassis.

4Push and slide the optical drive out through the front of the computer.

50

Optical Drive