Dell 7010 Hyper-Thread Control, Disabled by default, AC Recovery, Power Off default, Power On

Option	Description
Hyper-Thread Control	Allows you to enable or disable the Hyper-Threading technology. This option is
	disabled by default.
Table 7. Power Management
Option	Description
AC Recovery	Specifies how the computer will respond when AC power is applied after an AC
	power loss. You can set the AC Recovery to:
	•	Power Off (default)
	•	Power On
	•	Last Power State

Auto On Time

Deep Sleep Control

Fan Control Override

USB Wake Support

Wake on LAN

This option sets the time of the day when you would like the system to turn on automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The startup time can be changed by typing the values in the time and A.M./P.M. fields.

•Disabled - The system will not automatically power up.

•Every Day - The system will power up every day at the time you specified above .

•Weekdays - The system will power up Monday through Friday at the time you specified above.

•Select Days - The system will power up on days selected above at the time you specified above.

NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled.

Allows you to define the controls when Deep Sleep is enabled.

•Disabled

•Enabled in S5 only

•Enabled in S4 and S5

This option is disabled by default.

Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed.

This option allows you to enable USB devices to wake the computer from standby.

•Enable USB Wake Support - This option is disabled by default.

This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply. The options differ based on the form factor.

•Disabled - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN.

•LAN Only - Allows the system to be powered on by special LAN signals.

•WLAN Only - Allows the system to be powered on by special WLAN signals. (For Ultra Small Form Factor only)

41