Create the DHCP User Class
You must create the user class for the DHCP server before creating the DHCP Policy.
1.Open the Windows 2008 DHCP Server DHCP manager.
2.In the console tree, navigate to IPv4. Right click IPv4, and then click Define User Classes from the
3.In the DHCP User Class dialog box, click Add to create a new user class.
4.In the New Class dialog box, enter the following information and click OK to create a user class.
a.In the Display Name box, enter iPXE.
b.In the Description box, enter iPXE Clients.
c.In the data pane, under ASCII, enter iPXE.
5.Click Close.
Create the DHCP Policy
Use the new User Class to create a DHCP policy scope option.
1.Open the Windows 2008 DHCP Server DHCP manager.
2.Add a scope option to the DHCP scope that will service ASM PXE environment.
3.In the Scope Options dialog box, click the Advanced tab, select 067 Bootfile Name check box, and in the String value box, enter bootstrap.ipxe .
NOTE: For PXE service to function properly, you must enter bootstrap.ipxe for the 067 Bootfile Name.
4.Select DHCP Standard Options from the Vendor class
5.Select iPXEclass from the User Class
6.Click OK to save the scope option.
The policy is created by utilizing the new User Class with a scope option.
Create the Boot File Scope Option
The Boot File option is created for the DHCP scope that services your ASM PXE.
1.Open the Windows 2008 DHCP Server DHCP Manager.
2.In the console tree, expand the scope that will service your ASM PXE network. Right click Scope Options and select Configure Options.
3.In the right pane, enter the following information:
•Click 066 Boot Server Host Name and enter the IP address or DNS name of ASM server in the Value column.
•For PXE service to function properly, click 067 Bootfile Name and enter undionly.kpxe in the Value column.
4.Additionally, in the right pane, based on you network settings, configure the following:
•003 Router (default gateway that is on the PXE network)
•006 Name Server (DNS server IP address)
45
