7Connect the FlexBay USB cable to the back of the Media Card Reader and to the Media Card Reader connector on the system board (see page 71).

USB cable

*Media Card Reader

*Not present on all computers.

8Insert the Media Card Reader into the bay and slide the drive in to seat it in the computer.

9Route the USB cable through the cable routing clip.

10Replace the computer cover (see page 107).

CD/DVD Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

102

Removing and Installing Parts

Page 102
Image 102
Dell 9150 manual CD/DVD Drive, 102, USB cable Media Card Reader Not present on all computers