Undoing the Last System Restore

NOTICE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete.

1Click the Start button, point to All Programs→ Accessories→ System Tools, and then click System Restore.

2Click Undo my last restoration and click Next.

Enabling System Restore

If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System Restore is automatically disabled. To see if System Restore is enabled:

1Click the Start button and click Control Panel.

2Click Performance and Maintenance.

3Click System.

4Click the System Restore tab.

5Ensure that Turn off System Restore is unchecked.

Using Dell PC Restore by Symantec

NOTICE: Using Dell PC Restore permanently deletes all data on the hard drive and removes any applications or drivers installed after you received your computer. If possible, back up the data before using PC Restore. Use PC Restore only if System Restore did not resolve your operating system problem.

NOTE: Dell PC Restore by Symantec is not available in all countries or on all computers.

Use Dell PC Restore by Symantec only as the last method to restore your operating system. PC Restore restores your hard drive to the operating state it was in when you purchased the computer. Any programs or files added since you received your computer—including data files—are permanently deleted from the hard drive. Data files include documents, spreadsheets, e-mail messages, digital photos, music files, and so on. If possible, back up all data before using PC Restore.

To use PC Restore:

1Turn on the computer.

During the boot process, a blue bar with www.dell.com appears at the top of the screen.

2Immediately upon seeing the blue bar, press <Ctrl><F11>.

If you do not press <Ctrl><F11> in time, let the computer finish starting, and then restart the computer again.

NOTICE: If you do not want to proceed with PC Restore, click Reboot in the following step.

3On the next screen that appears, click Restore.

Troubleshooting Tools

61

Page 61
Image 61
Dell 9150 manual Using Dell PC Restore by Symantec, Undoing the Last System Restore, Enabling System Restore