Secure Digital (SD) Memory-Card Reader

Cards supported

SD, SDIO, SD HC, Mini SD (with adapter)

 

MMC, MMC+, Mini MMC (with adapter)

 

 

Memory

 

 

 

Memory module connector

two DIMM sockets

Memory module capacities

512 MB (one DIMM)

 

1 GB (one DIMM or two DIMMs)

 

2 GB (one DIMM or two DIMMs)

 

3 GB (two DIMMs)

 

4 GB (one DIMM or two DIMMs)

 

8 GB (two DIMMs, requires 64-bit

 

Windows XP or Windows Vista operating

 

system)

Memory type

DDR2 800 MHz (if supported by chipset

 

and/or processor combinations); non-ECC

 

memory only

Minimum memory

512 GB

Maximum memory

8 GB (requires 64-bit Windows XP or

 

Windows Vista operating system)

NOTE: In order to take advantage of the dual-channel bandwidth capability, both memory sockets must be populated and must match in size.

NOTE: The available memory displayed does not reflect the complete maximum memory installed because some memory is reserved for system files.

NOTE: To enable Intel® Active Management Technology (iAMT), you must have a DIMM in the memory connector labeled A. For more information about the memory connector see your computer’s Service Manual at support.dell.com. For more information about iAMT, refer to the Dell™ Systems Management Administrator's Guide at support.dell.com.

Ports and Connectors

Audio

microphone connector and stereo

 

headphone/speakers connector

IEEE 1394a

4-pin connector

22

Specifications

Page 22
Image 22
Dell NU229, ATG E6400, PP27L specifications Secure Digital SD Memory-Card Reader, Ports and Connectors