Dell C800 manual Display Assembly Bezel and Panel

Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual

2.Remove the 6-mm screw that secures the display flex cable to the strain relief, and then use the pull loop to remove the display flex cable from the graphics card.

NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector can damage fragile components.

3.Open the display and, from the back of the computer, remove the two screws labeled with a "circle D" that secure the display assembly to the bottom case assembly.

4.With the display in an upright position, lift the display assembly from the bottom case assembly.

Display Assembly Bezel and Panel

file:///F/Service%20Manuals/Dell/Latitude/c800/ch2.htm (20 of 49) [2/28/2004 8:00:16 AM]