Dell C800 manual Closing the Microprocessor Retaining Clip

Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual

NOTICE: Hold the microprocessor down while turning the cam lock screw to prevent intermittent contact between the cam lock screw and microprocessor (see "Microprocessor Cam Lock Screw").

2. Tighten the cam lock screw.

NOTICE: Do not over- or undertighten the screw. Tighten it until the screw indicator points to the "closed" or "locked" indicator on the socket.

3. Replace the microprocessor thermal cooling assembly.

Closing the Microprocessor Retaining Clip

4.While pressing lightly down on the center of the retaining clip, insert a flat-blade screwdriver into the latch mechanism and pivot the top of the screwdriver away from

file:///F/Service%20Manuals/Dell/Latitude/c800/ch2.htm (30 of 49) [2/28/2004 8:00:16 AM]