Dell D01T Installing the Memory, Removing the Coin-Cell Battery, Installing the Coin-Cell Battery

3.Press down on the memory-securing clips on each side of the memory module, and lift the memory module upwards to remove it from the computer.

Installing the Memory

1.Insert the memory module into the memory socket.

2.Press down on the memory module until the securing clips secure the memory in place.

3.Install:

a.air tunnel (if available)

b.cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Coin-Cell Battery

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.cover

b.air tunnel (if available)

3.Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell battery out of the computer.

Installing the Coin-Cell Battery

1.Place the coin-cell battery into the slot on the system board.

2.Press the coin-cell battery downward until the release latch springs back into place and secures it.

3.Install:

a.cover

b.air tunnel (if available)

4.Follow the procedures in After Working Inside Your Computer.

23