Replacing the Modem | Dell D410 specs

Replacing the Modem

1. Connect the modem cable to the modem.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

2.Align the modem with the modem-screw hole and press the modem into the modem connector on the system board.

3.Install the modem screw to secure the modem to the system board.

4.Replace the modem cover.

Back to Contents Page

Image 38

Dell D410 manual Replacing the Modem

Contents

January 2005 Rev. A00 Before You Begin Preparing to Work Inside the Computer Screw Identification Recommended ToolsComputer Orientation Back to Contents Flashing the Bios Internal Card With Bluetooth Wireless Technology Replace the battery Coin-Cell Battery Removing the Coin-Cell Battery Replacing the Coin-Cell Battery Replacing the Center Control Cover Center Control CoverRemoving the Center Control Cover Display Assembly Removing the Display Assembly Replacing the Display Assembly Back to Contents Replacing the Fan FanRemoving the Fan Page Replacing the Hard Drive Hard DriveRemoving the Hard Drive Page Keyboard Removing the Keyboard Replacing the Keyboard Mini PCI Card Removing the Mini PCI Card Replacing the Mini PCI Card Replace the center control cover Back to Contents Palm Rest Removing the Palm RestPage Replacing the Palm Rest Video Connector Pin Assignments for I/O ConnectorsUSB Connector Replacing the Smart Card Reader Smart Card ReaderRemoving the Smart Card Reader Replace the M2 x 3-mm screw System Board Removing the System Board Replacing the System Board Back to Contents System Components January 2005 Rev. A00 Memory Module and Modem Memory Module Removing the Memory Module from Dimm B Modem Replacing the Memory Module in Dimm B Removing the Modem Replacing the Modem