Dell Dimension 4300 technical specifications Option Function

settings and values are set by the computer and cannot be changed. When <Enter> appears to the right of an option, press <Enter> to access a pop- up menu of additional options.

•Key functions – A line of boxes across the bottom of all system setup screens that lists keys and their functions within the system setup program.

•Help – Press <F1> for information on the option that is selected (highlighted).

Option			Function
System Time			Displays the system time.
System Date			Displays the system date.
Diskette Drive A:			Displays floppy drive details.
Primary Drive 0:			Displays primary hard drive 0. The default is Auto.
Primary Drive 1:			Displays primary hard drive 1 (if installed). The default is Off.
Secondary Drive 0:			Displays secondary hard drive 0. The default is Auto.
Secondary Drive 1:			Displays secondary hard drive device type. The default is Off.
Boot Sequence			Displays boot sequence when <Enter> is pressed.
System Memory			Displays amount of system memory.
AGP Aperture			Displays amount of aperture memory. The default is 128 MB.
CPU Information			Displays CPU information when <Enter> is pressed.
Integrated Devices (Legacy Select			Displays integrated device options when <Enter> is pressed.
Options)
PCI IRQ Assignments			Displays PCI IRQ assignments when <Enter> is pressed.
IRQ Reservations			Displays the IRQ reservations when <Enter> is pressed.
System Security			Displays system security options when <Enter> is pressed.
Keyboard Numlock			Turns the Keyboard NumLock option on and off. The default is On.
Report Keyboard Errors			Displays keyboard errors when set to Report. The default is Report.
Auto Power On			Allows auto power-on. The default is Disabled.
Remote Wake Up			Allows remote Wake on LAN. (Dell does not support Wake on LAN in S3 or S5 Suspend Modes on this Dimension™
			system.) The default is Off.
AC Power Recovery			Enables AC power recovery to occur. The default is Last.
Fast Boot			Turns the fast boot option on and off. The default is Off.
Suspend Mode			Displays the suspend state used by the computer. The default is S3.
System Event Log			Displays the system event log when <Enter> is pressed.
Asset Tag			Displays asset tag information.
The following table shows CPU Information option information.
Option	Function
CPU Speed	Sets the CPU speed. The default is Normal.
Bus Speed	Displays the bus speed.
Processor ID	Displays processor ID.
Clock Speed	Displays clock speed.
Cache Size	Displays cache size.
The following table shows Integrated Devices (Legacy Select Options) information.
Option		Function
Sound		Turns the integrated sound off and on. The default is On.
Mouse Port		Turns the mouse port off and on. The default is On.
USB Emulation		Turns USB emulation off and on. The default is On.
USB Controller		Turns the USB controller off and on. The default is On.
Serial Port 1		Sets serial port options and turns the port off and on. The default is Auto.
Parallel Port		Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.
IDE Drive Interface		Sets the IDE drive interface options. The default is Auto.
Diskette Interface		Sets diskette interface options. The default is Auto.
PC Speaker		Turns the PC speaker off and on. The default is On.
Primary Video Controller		Sets the primary video controller. The default is AGP.
Video DAC Snoop		Turns the video DAC Snoop off and on. The default is Off.