Rear SSD indicator patterns
Figure 4. Rear SSD indicator patterns
1. SSDactivity indicator (green) 2. SSD status indicator (green and amber)
NOTE: If an SSD is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the
right side) does not function and remains off.
Table 5. Rear SSD indicator patterns
Drive-Status Indicator Pattern (RAID Only) Condition
Blinks green two times per second Identifying SSD or preparing for removal
Off SSD ready for insertion or removal
NOTE: The SSD status indicator remains off
until all SSDs are initialized after the system is
turned on. SSDs are not ready for insertion or
removal during this time.
Blinks green, amber, and off Predicted SSD failure
Blinks amber four times per second SSD failed
Blinks green slowly SSD rebuilding
Steady green SSD online
Blinks green three seconds, amber three seconds,
and off six seconds
Rebuild aborted
13