7. Install the system cover.
8. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
9. If applicable, install the front bezel.
Removing rear SSD backplane CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
2. Remove the system cover.
CAUTION: To prevent damage to the drives and backplane, you must remove the SSDs from
the system before removing the backplane.
CAUTION: You must note the number of each SSD and temporarily label them before
removal so that you can replace them in the same locations.
3. Remove both SSDs.
4. Disconnect all the cables from the backplane.
5. Lift the release pin and slide the backplane away from the chassis.
6. Lift the backplane to remove it from the chassis.
81