Figure 33. Removing and installing the vFlash Media Unit
1. cable 2. screw
3. vFlash media unit 4. standoff
Installing vFlash media
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from its electrical
outlet.
2. Remove the system cover.
3. Slide in and align the vFlash media unit toward the back of chassis.
4. Connect the cable to the vFlash media unit.
5. Replace the screw securing the vFlash media unit to the chassis.
6. Install the system cover.
7. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
66