NOTE: Retain removed memory-module blanks for future use.
Figure 14. Removing The Memory Module
1. memory module/memory-module blank
7. Install the cooling shroud.
8. Install the system cover.
9. Reconnect the system to its electrical outlet and turn on the system, including any attached
peripherals.
Installing memory modules
WARNING: The memory modules are hot to the touch for some time after the system has been
turned off. Allow time for the memory modules to cool before handling them. Handle the
memory modules by the card edges and avoid touching the components or metallic contacts on
the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To make sure proper system cooling, memory-module blanks must be installedin any
memory socket that is not occupied. Remove memory-module blanksonly if you intend to install
memory modules in those sockets.
1. Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
2. Remove the system cover.
3. If applicable, remove the cooling shroud.
4. Locate the memory-module sockets.
CAUTION: Handle each memory module only by the card edges, making sure not to touch
the middle of the memory module or metallic contacts. To avoid damaging the memory
module, handle only one memory module at a time.
5. If a memory module or a memory-module blank is installed in the socket, remove it.
NOTE: Retain removed memory-module blanks for future use.
44