4.Perform the following steps:
a.Remove the screw to release the metal bracket on the power-connector port [1] [2].
b.Lift and remove the power-connector port from the computer [3].
Installing the power-connector port
1.Insert the power-connector port into its place on the computer.
2.Place the metal bracket on the power-connector port and tighten the screw to secure the power- connector port to the computer.
3.Route the power-connector port cable to its routing channels and connect the power-connector port cable to its connector on the system board.
4.Install the:
a.battery
b.base cover
5.Follow the procedures in After Working Inside Your Computer.
