Dell E6410ATG Parallel Port, Serial Port, Sata Operation, Miscellaneous Devices, LCD Brightness

Parallel Port

Default Setting: ECP

Allows you to configure the integrated serial port. The options are: Disabled, COM1, COM2, COM3, and COM4

Serial Port

Default Setting: COM1

Allows you to configure the internal SATA hard drive controller. The options are: Disabled, ATA, AHCI, and RAID On

SATA Operation

Default Setting: RAID On

Allows you to enable or disable the following devices:

	•	Internal Modem
	•	Module Bay
	•	ExpressCard or PC Card
	•	Media Card, PC Card and 1394
Miscellaneous Devices	•	External USB Port
	•	Microphone
	•	eSATA Ports
	•	Hard Drive Free Fall Protection
	•	Camera and Microphone
	Default setting: All enabled.
Latitude ON™ Reader	Allows you to configure the operating mode of the Latitude ON Reader. The options are: Disabled and Enabled
	Default Setting: Enabled
	Allows you to configure the keyboard illumination feature. The options are: Disabled, Auto ALS and Input, and Auto Input
Keyboard Illumination	Only
	Default Settings: Disabled
Video
Option	Description
	To enable the Ambient Light Sensor, select the Ambient Light Sensor check box.
Ambient Light Sensor
	Default Settings: Disabled
LCD Brightness	Allows you to set the display brightness depending up on the power source (On Battery and On AC).
Security
Option	Description
	Allows you to set, change, or delete the administrator (admin) password. When set, the admin password enables several
	security features including:
	•	Restricts changes to the settings in Setup
	•	Restricts the boot devices listed in the <F12> Boot Menu to those enabled in the "Boot Sequence" field
	•	Prohibits changes to the owner and asset tags
Admin Password	•	Substitutes for the system and hard drive password
	NOTE: You must set the admin password before you set the system or hard drive password.
	NOTE: Successful password changes take effect immediately.
	NOTE: Deleting the admin password automatically deletes the system password as well.
	Default Setting: Not Set
	Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system
	password every time your computer turns on or restarts.
System Password	NOTE: Successful password changes take effect immediately.
	Default Setting: Not Set
	This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take
	place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even
Internal HDD Password	when installed in another system.
	Default Setting: Not Set
	Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from
	standby.
Password Bypass	You can set Password Bypass to Disabled and Reboot Bypass.
	NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been shut down.
	Default Setting: Disabled
	Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.
Password Change
	Default Setting: Allow Non-Admin Password Changes checked
	Allows you to enable of disable option to enforce strong passwords. If enabled, all passwords set on the computer must
	contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature
Strong Password	automatically changes the default minimum password length to 8 characters.
	Default Setting: Disabled
	Allows you to enable or disable the Trusted Platform Module (TPM) on the computer.
	NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or keys
	you may have stored there.