Back to Removing and Replacing Parts
Coin-cell Battery
Dell™Latitude™E6410/E6410ATGServiceManual

Removing the Coin-cell Battery

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the ATG Port Cover (applicable on E6410 ATG computer only).
3. Remove the battery.
4. Remove the access panel.
5. Disconnect the coin-cell battery cable from the system board.
6. Lift and remove the coin-cell battery out of its socket.

Replacing the Coin-cell Battery

To replace the coin-cell battery, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.