Back to Removing and Replacing Parts

Camera

Dell™ Latitude™ E6410/E6410 ATG Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Camera

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the battery.

3.Remove the display bezel.

4.Loosen the captive screw that secures the camera to the computer.

5.Remove the camera from the slot on the computer.

6.Disconnect the data cable to remove the camera from the computer.

Replacing the Camera

To replace the camera, perform the above steps in reverse order.

Back to Removing and Replacing Parts

Page 19
Image 19
Dell E6410ATG specifications Removing the Camera, Replacing the Camera