Dell HX574, R905 owner manual RAC Card Connectors RJ-45 RAC NIC connector

Figure 3-14. RAC Card Connectors

23

1

1	RJ-45 RAC NIC connector	2	44-pin MII cable connector
3	50-pin management cable connector

7Reinstall the storage controller card.

8Reconnect all cables to the storage controller card.

9Close the system. See "Closing the System" on page 66.

10Reconnect the system and peripherals to their power sources, and turn them on.

11Enter the System Setup program and verify that the setting for the Boot Sequence has changed to reflect the presence of the RAC card. See "Using the System Setup Program" on page 43.

12Exit the System Setup program and reboot the system.

When the system boots, the Remote Access Controller Detected message displays and the option ROM and firmware information for the RAC displays.

Press <Ctrl><e> to enter the RAC configuration screen. See the RAC documentation for information on configuring and using the RAC.

84

Installing System Components