Dell R905, HX574 owner manual 127

6Disconnect the power cable from the top of the peripheral interposer board. See Figure 3-32.

NOTICE: When disconnecting the control-panel cable, hold the pull-tab on the control-panel cable connector to prevent damage to the interposer board or the cable itself.

7Disconnect the control-panel cable from the control-panel cable connector on the back of the interposer board. See Figure 3-32.

8Disconnect the planar interface cable from the back of the interposer board.

9Disconnect the SATA cable from the back of the interposer board.

Installing System Components

127