Installing The Palmrest Assembly
1.Align the palmrest assembly with the computer and snap it into place.
2.Replace and tighten the screws to secure the palmrest assembly to the system board.
3.Connect the following cables to the system board:
•LED board
•touchpad
•bluetooth
•contactless smart card reader
•Express Card
•fingerprint reader
4.Replace and tighten the screws to secure the palmrest assembly to the computer.
5.Install the keyboard.
6.Install the keyboard trim.
7.Install the hard drive.
8.Install the ExpressCard.
9.Install the base cover.
10.Install the optical drive.
11.Install the Secure Digital (SD) card.
12.Install the battery.
13.Follow the procedures in After Working Inside Your Computer.
45
