Installing The Display Assembly
1.Align the display assembly into its original position on the computer.
2.Replace and tighten the screw to secure the display assembly to the computer.
3.Replace and connect the display cable to the system board.
4.Align the display cable bracket to its original position.
5.Replace and tighten the screws to secure the display cable bracket to the system board.
6.Route the antenna cables through the system board.
7.Replace and tighten the screws to secure the display panel to the computer.
8.Route the antenna cables to their original position.
9.Install the display hinge covers.
10.Install the palmrest assembly.
11.Install the keyboard.
12.Install the keyboard trim.
13.Install the hard drive.
14.Install the ExpressCard.
15.Install the base cover.
16.Install the optical drive.
17.Install the Secure Digital (SD) card.
18.Install the battery.
19.Follow the procedures in After Working Inside Your Computer.
67
