6.Disconnect the Low-Voltage Differential Signaling (LVDS) cable from the display panel.

7.Remove the display panel from the display assembly.

Installing The Display Panel

1.Align the display panel in its original position on the display assembly.

2.Connect the Low-Voltage Differential Signaling (LVDS) cable to the display panel.

3.Tighten the screws to secure the display panel to the display assembly.

4.Install the display bezel

5.Install the battery

6.Follow the procedures in After Working Inside Your Computer.

94

Page 94
Image 94
Dell Latitude E6320 owner manual Installing The Display Panel