Dell LG7_bk0 user manual To turn on Wi-Fi and connect to a network

To turn on Wi-Fi and connect to a network

1Touch the Home button → Apps button →

Settings → Wireless & networks→ Wi-Fi to select the

Wi-Fi check box. The device scans for available wireless networks.

2Touch Wi-Fi settings. The network names and security settings (Open network or Secured with WEP/WPA/WPA2/WPS) of discovered Wi-Fi networks display in the Wi-Fi networks list.

3Flick the list and touch to select a Wi-Fi network you want to connect to.

4Enter a password (if necessary), then touch Connect to connect to the Wi-Fi network.

NOTE: To connect to a network protected by Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, or Wireless Protected Setup (WPS), you must enter the WEP/WPA/WPA2/WPS security key to obtain authorized access to the network. The next time your device connects to a previously accessed secured wireless network, you will not be required to enter the WEP/WPA/WPA2/WPS key again, unless you reset your device to its factory default settings.

NOTE: Your device has the ability to maintain a constant Internet connection through Wi-Fi or data networks (GPRS, EDGE, 3G, or HSPA). However, Wi-Fi connection has priority over mobile network connection if both are available.

To check the current Wi-Fi network connection

From the status area of the system bar:

When your device is connected to a wireless network, the Wi-Fi icon in the status area of the system bar indicates the signal strength

(number of bands that light up). If Wireless & networks→ Wi-Fi

settings→ Network notification is enabled, the icon appears in

the notifications area of the system bar, as the device discovers an accessible Wi-Fi network within range.

64

Internet