Using Your Projector 21
KEYSTONE—Adjusts the image distortion caused by tilting the projector.
MENU POSITION—Allows you to select the position of the OSD menu on the screen.
MENU TRANSPARENCY—Select to change the transparency level of the OSD background.
MENU TIMEOUT—Allows you to adjust the time for an OSD Timeout. By default, the
OSD disappears after 30 seconds of non-activity.
MENU LOCK—Select On to enable Menu Lock and hide the OSD menu. Select Off to
disable the Menu Lock and display the OSD menu.
NOTE: If the OSD disappears while you disable Menu Lock, press the Menu button
on the control panel for 15 seconds, then disable the function.
PASSWORD—When Password Protect is enabled, a Password Protect screen requesting
you to enter a password will be displayed when the power plug is inserted into the
electrical outlet and the power for the projector is first turned on. By default, this
function is disabled. You can enable this feature using the Password menu. This
password security feature will be activated the next time you turn on the projector. If
you enable this feature, you will be asked to enter the projector's password after you
turn on the projector:
1
1st time password input request:
a
Go to
Setup
menu, press
Enter
and then select
Password
to
Enable
the password
setting.
b
Enable the Password function will pop up a character screen, key in a 4-digit number
from the screen and press the
Enter
button.
c
To confirm, enter the password again.
d
If the password verification is successful, you may resume with accessing the
projector's functions and its utilities.