1 rubber screw covers (2) 2 screws (2)

Replacing the Display Bezel

1.Realign the display bezel over the display panel, and gently snap into place.

2.Replace the two screws securing the display bezel to the display assembly.

3.Replace the two rubber screw-covers/display bumpers around the screws.

Removing the Display Panel

1.Remove the display assembly (see Removing the Display Assembly).

2.Remove the display bezel (see Removing the Display Bezel).

3.Remove the display cable from the routing channel.

4.Remove the camera cable connector.

5.Remove the twelve screws that secure the display panel brackets to the display panel.

1

camera cable connector

2

display panel

 

 

 

 

3

screws (12)

4

light lobes connector

 

 

 

 

6.Disconnect the light lobes connector using the pull-tab.

7.Remove the display panel.

Page 17
Image 17
Dell M1730 manual Replacing the Display Bezel, Removing the Display Panel